ISOLATORS
The isolator is a switch which isolates the part of the circuit system when it is required. Electrical isolators are the separate part of the system that is created for safe maintenance. Isolators are generally used at the end of the breaker to repair or to replace.
| PARAMETER | REMARKS |
| Standard Conformity | IS/IEC 60947-3 |
| Rated Current (In) | 40A, 63A, 100A |
| Rated Voltage (Ue) | 240,415V |
| Rated Insulation Voltage (Ui) | 660 V |
| Rated Impulse Voltage (Uimp) | 4KV |
| Rated Frequency | 50/60Hz |
| No. of Pole | DP, TP, & FP |
| Degree of Protection | IP20 |
| Termial TighteningTorque | 2 Nm |
| Storage Temp | -5° to 55℃ |
| Vibration | 3g |
| Endurance Mechanical & Electrical Cycles | 10000 |
| Utilization Category | AC 22A |
| Shock Test | 40 mm free fall |
| Terminal Capacity | 35mm2 |
| Installtion Position | Vertical / Horizontal |
| Mounting | Clip on Din Rail (35mm * 7.5mm) |
Large Terminals
IP 20 Protection
BI-stable Din Clip
Fire Retardant
